-
Device use environment
Different device models need to be added in different ways depending on your smartphone and device model, there are four ways to add devices based on the device's functions. Before you start adding devices, please note the following points:
-
Make sure the device is and the red light is flashing; please use the original power adapter and cord to avoid issues such as insufficient power supply.
-
Make sure the network connection is normal. Please connect your phone to a stable Wi-Fi connection, and use the phone's system browser to visit a website and check whether the network connection is good.
-
Make sure the phone and the device are under the same 2.4GHz Wi-Fi Network (If you only have 5GHz Wi-Fi, please check if the device you have supports an internet connection.). If you are using a dual-band router, you can log in to the router's background control panel to enable a 2.4GHz Wi-Fi connection, or contact the router's provider to inquire how to enable it, which can effectively improve the success rate of the dual-band router's network allocation. Only parts of A33, A12S, and A31P support a 5GHz connection.
-
-
Place the device as close to the router as possible.
-
Please note that during the process of adding a device, the App needs permission to get the Wi-Fi information of the phone. Due to privacy limitations of the Android and iOS systems, obtaining the Wi-Fi information also requires the position/location permission from your phone. Please agree to authorize the permissions. If you have refused to grant location permission, you can reauthorize it in the following way:
-
iOS users: System Settings -> blurams -> Location -> Select “While Using”
-
Android users: System Settings -> Applications -> blurams -> Permissions -> Open Location
-
-
-
Connection guide
Different adding methods will be different due to different attributes of the device.
QR Code(Wi-Fi Connection)
-
On the device list of the app, tap the "+" sign in the upper right corner.
-
Select the device you're going to add, and select "Wi-Fi Connection".
-
Press and hold the RESET button until the indicator light of the device changes to a blinking red light, or you hear a beep.
-
Make sure that the Wi-Fi is a 2.4GHz network (If you only have 5GHz Wi-Fi, please check if the device you have supports an internet connection). Enter the Wi-Fi password and connect it to the camera.
-
Have the device scan the the QR code generated on the phone, and keep a proper distance (10-20 cm or 4-8 inches)until the camera’s indicator light changes to a blinking green light, or you hear two beeps from the device.
-
After scanning the QR code successfully, the device will start to connect to the Wi-Fi and then the server until it is set.
AP Mode(Wi-Fi Connection)
-
On the device list of the app, tap the "+" sign in the upper right corner.
-
Select the device you're going to add, and select "Wi-Fi Connection" (only supported by part of devices, please choose according to the APP display).
-
Press and hold the RESET button until the indicator light of the device changes to a blinking red light, or you hear a beep, select AP entrance. Go to the phone’s Setting -> Wi-Fi and connect your phone to a Wi-Fi named “CAM_xxxxxxx”
-
After the connection is successful, return to theBluramsAPP to display the Wi-Fi list scanned by the device.
-
Select the Wi-Fi to which the device will be connected and enter the password After clicking Next, the device will start to connect to the Wi-Fi and server and complete the setup.
Network Cable Connection
-
On the device list of the app, tap the "+" sign in the upper right corner.
-
Select the device you're going to add and select "Network Cable Connection"(only supported by part of devices, please choose according to the APP display).
-
Press and hold the RESET button until the indicator light of the device changes to a blinking red light, or you hear a beep.
-
Your device information needs to be matched before connecting, by scanning QR or entering the current SN code on the device.
-
After clicking Next, the device will start to connect to the Wi-Fi and server and complete the setup.
Bluetooth Connection
-
On the device list of the app, tap the "+" sign in the upper right corner.
-
Select the device you're going to addand select "Bluetooth Connection"(only supported by part of devices, please choose according to the APP display).
-
Press and hold the RESET button until the indicator light of the device changes to a blinking red light, or you hear a beep.
-
Select the Bluetooth signal that your phone has found to match the device, you can also match by scanning the QR code or entering the SN on the the device. Then wait for the match to be successful. The bluetooth is always named as “CAM_xxxxxxx”
-
After that Select the Wi-Fi to which the device will be connected and enter the password
- After clicking Next, the device will start to connect to the Wi-Fi and server and complete the setup.
More questions about Blurams and products, please feel free to contact us.
Our Website: https://www.blurams.com/
Email: support@blurams.com
Comments
0 comments
Article is closed for comments.