Resetting Camera
Answered
I moved from my old apartment which meant that I changed WiFi. Now, I want to reset the A31 camera and can't find the reset button. Please I need help with how to reset the camera.
0
-
To reset your A31 camera and connect it to the new WiFi network, follow these steps:
1. Locate the Reset Button: On the A31 camera, the reset button is usually a small, recessed button located on the side or the back of the device. You may need a pin or paperclip to press it.
2. Press and Hold: Use a pin or paperclip to press and hold the reset button for about 5 seconds until you hear a beep or see the indicator light change to a blinking red light. This indicates the camera is ready to be reconfigured.
3. Set Up the Camera:
- Open the blurams app, go to the device list, and tap the "+" sign in the upper right corner.
- Select the A31 camera from the list and choose the connection method (e.g., QR Code or AP Mode).
- For QR Code connection, enter the new WiFi network details (make sure it is a 2.4GHz network) and generate a QR code on your phone.
- Scan the QR code using the camera lens until the indicator light changes to a blinking green light or you hear two beeps.
- The camera will start connecting to the WiFi and server.
4. Complete Setup: Follow any additional instructions in the app to finish setting up the device with your new network.
If you encounter any issues during setup, ensure the camera is close to the router and the network connection is stable.
For further assistance, please let me know or try updating the app to the latest version if the problem persists.0
Please sign in to leave a comment.
Comments
1 comment