How can I add a device/ connect to network?

Different device models need to be added in different ways depending on your smartphone and device model, there are two ways to add devices: using a QR code and using the AP mode. Before you start adding devices, please note the following points:

1. Make sure the device is On and the red light is flashing; please use the original power adapter and cord to avoid issues such as insufficient power supply.
2. Make sure the network connection is normal. Please connect your phone to a stable Wi-Fi connection, and use the phone's system browser to visit a website and check whether the network connection is good.
3. Make sure the phone and the WiFi camera are under the same 2.4GHz Wi-Fi Network (the device does not currently support 5GHz/5G). If you are using a dual-band router, you can log in to the router's background control panel to enable a 2.4GHz/2.4G Wi-Fi connection, or contact the router's provider to inquire how to enable it.
4. Place the device close to the router.

Please note that during the process of adding a device, the App needs permission to get the Wi-Fi information on the phone. Due to the privacy limitations of the Android and iOS systems, obtaining the Wi-Fi information also requires position/location permission from your phone. Please agree to authorize the permissions. If you have refused to grant location permission, you can reauthorize it in the following way:

1. iOS users: System Settings-> blurams-> Location -> Select “While Using”
2. Android users: System Settings-> Applications-> blurams -> Permissions -> Open "Location"

1, QR Code

1. On the device list of the app, tap the "+" sign in the upper right corner.
2. Select the device you're going to add.
3. Press and hold the RESET button until the indicator light of the device changes to a blinking red light, or you hear a beep.
4. Make sure that the Wi-Fi is a 2.4G network. Enter the Wi-Fi password and connect it with the device.
5. Have the device scan the QR code generated on the phone, and keep a proper distance until the camera’s indicator light changes to a blinking green light, or you hear two beeps.
6. After scanning the QR code successfully, the device will start to connect to the Wi-Fi and server and finish its setup.

2, AP Mode (Outdoor Pro/ Outdoor Lite)

1. On the device list of the app, tap the "+" sign in the upper right corner.
2. Select the model you're going to add.
3. Press and hold the RESET button until the indicator light of the device changes to a blinking red light, or you hear a beep.
4. Go to the phone’s Setting-> Wi-Fi and connect your phone to a Wi-Fi named “CC_xxxxxxx”
5. After the connection is successful, return to the Blurams APP to display the Wi-Fi list scanned by the device.
6. Select the Wi-Fi to which the device will be connected and enter the password
7. After clicking Next, the device will start to connect to the Wi-Fi and server and complete the setup.

More questions about Blurams and products, please feel free to contact us.

Our Website: https://www.blurams.com/

Email: support@blurams.com